Cookie G4 Helmet

Pre-orders for the Cookie G4 have begun. Orders in by June 6th are estimated to begin shipping end of July 2019.

More details

Usually ships within 3 weeks.

$439.00 .


Differences Between the G3 and G4
  • Certified to XP S 72-600
  • Same superior viewing area
  • Better internal design for a better fit
  • Easier fitting of audible altimeters
  • The back offers more coverage for protection
  • More protection around the temple area as the visor mechanism is also thinner
  • The mechanism is similar in operation but designed to offer no maintenance
  • A lot quieter as it seals better in all areas and the exterior shape is sleek and smooth by design
  • No glue holding the chin curtain in place
  • Cooler due to the ventilation design
  • Ventilation control can be adjusted by the user
  • One visor fits all G4 helmets sizes

 Initial G4 helmet orders will be limited to the following matte colour choices: black, white, dark blue, red, charcoal, tactical green, royal blue and lime green. We anticipate the other five colour options—electric blue, orange, purple, yellow and pink—will be available for purchase in late July and ship late August.


G4 Sizing Chart

The internal liner system for the G4 is more conducive to traditional helmets and sizing does vary from the G3. Cookie is working on youth large and medium sizes for heads 51-53 cm. These should be available in the later half of 2019, pending testing. 

Fitting a Camera to our G4 Helmet
The G4 Helmet is certified to a Skydiving and Wind Tunnel Helmet Standard. To achieve this standard, helmets must pass Impact and Snag Resistance testing. While the G3 Roller mount base is a good fit against the top surface of the G4, it was not tested according to the XP S 72-600 Standard. We believe that having a Roller Mount fitted to the G4 helmet would forgo the Snag Test in this standard. It is up to the user to decide whether to mount a camera to the G4 helmet knowing that by doing so, it could affect the way the helmet performs when tested to the XP S 72-600 Standard.

G4 Ventilation Control Cookie G4 ventilation system

The internal EPP foam has been styled to create channels within the helmet to provide ventilation. The top padding also has breathable material to allow the hot air to be drawn into these channels.

The chin bar actuators can control the airflow to your mouth area as well as direct to the inner surface of the visor.

Two rear ventilation ports allow the evacuation of this hot air from within the helmet.

Certified G4 Visor

Cookie G4 visorsOne visor fits all the G4 helmet sizes. Visors have an anti-fog inside and anti-scratch outside. We offer a tinted and blue mirrored visor option. Our G4 visor is tested for its optical qualities, and as such it has been certified and carries a CE mark.

The visor is very simple to remove. Undo the two side plates screws on both side of the visor. Remove these plates and slide the visor forward. Our tinted and mirrored visors are certified to Category 2 against ISO 12312-1:2013.

Side plate accessories

Cookie G4 side platesYou can accessorize your G4 helmet with many of the side plate colour and engraving options. (sold separately.)

With a larger print area, you can add your own custom engraving.

Write a review

Cookie G4 Helmet

Cookie G4 Helmet

Pre-orders for the Cookie G4 have begun. Orders in by June 6th are estimated to begin shipping end of July 2019.

Viewed products

OTHER ITEMS YOU MAY NEED:

18 other products in the same category