The Pivot Pad System has been designed to eliminate the snag hazards associated with 99% of other camera mount options. Housing is not included with glove. Please see links below to the camera housings. *This item does not qualify for free shipping.
In stock. Ready to ship.
Warning: Last items in stock!
Designed to eliminate the snag hazards associated with 99% of other skydiving camera mount options, the Pivot Pad can be used with the glove, bolted to flat surfaces (3" diameter flat circle area required), or sewn onto fabrics. A few different top parts can be added to the Pad's base. One is a universal flat top, the second is a single-cam housing for a GoPro, and the third top is a double-cam housing for two GoPro cameras (one for photos, one for video: for simultaneous shooting). All Pivot Pad tops are interchangeable. Easily remove one top and install another.
Compatible with: GoPro Hero 3, Hero 3+, and Hero 4 GoPro, Hero Session, Hero 5 Session, and Sony Az1
Low snag risk. The Pad's base has a very low profile, making snags less likely. A vertical wall surrounds the top piece. This helps keep unwanted items such as parachute lines, clothing, and other hardware from becoming trapped on the Pivot Pad.
360 degrees of adjustability, with a friction adapter holding the position you choose until you decide you prefer another.
Solid mount solution. There's a wide base for attachment of the camera, instead of a skinny stalk. This helps the photographer achieve more steady shots instead of shaky scenes.
Heavy Duty. The mounts have been through a full year of design and testing before manufacturing them for the market. They have been tested with heavy loads, vice grips, numerous skydives, and found them to be quite resilient. It's extremely difficult to break one.
Aerodynamic. With a low profile and rounded shape, these Pivot Pads have more aerodynamic shapes than your typical camera mount. Smoother airflow over the camera system leads to smoother shots when participating in speedy activities.
Single Hero 5 Housing: A lightweight housing for a single hero 5 Black camera. All buttons and ports can be accessed without removing the camera.
Single Cam: Designed for a skydiving environment, this housing slips through the air at high speeds, handles impacts without issue, and provides quick access to camera ports. A wide base and aerodynamic shape help eliminate camera shake, so videos look 10X better on the big screen. The angle is infinitely adjustable. It has real glass lens protection. Sound is much improved, thanks to holes aligned with camera microphones.
This double-cam system has all the same great features of the single-cam, it's just a bit taller and heavier. Both lenses can be removed and cleaned easily. All microphones have holes exposing them directly to sound waves, providing for full range frequency reproduction. It's great to hear a scream as it was intended, instead of as a muffled yelp.
The Pivot Pad Dual Sony Mount for Sony HDR-AZ1 mini action cams. Can be used with one or two cameras.
The Pivot Pad Session + Viso Mount allows you to have your Viso altimeter and GoPro Session 4 in one place for easy viewing and capturing of your best skydiving moments!
Dual GoPro Session Mount for two GoPro Session cameras to capture all of the action!
Lightweight Double Session Housing for GoPro Hero Session 5.
Length Measurement: Measure from the base of your palm to the tip of your middle finger on your dominant hand.
Youth S: 6-1/2" - 6 3/4"
Youth M: 6-3/4" - 7"
Youth L: 7" - 7-1/4"
Small: 7-1/4"- 7-1/2"
Med: 7-1/2" - 7-3/4"
Large: 7-3/4" - 8"
XL: 8 - 8-1/4"
XXL: 8-1/4" - 8-1/2"
XXXL 8-1/2 and up
Width Measurement: measure from the lowest (at the hand) knuckle of your forefinger to the knuckle of your pinky finger. See the sizes below.
2 5/8 - 3 1/8" Small
3 1/8 - 3 5/8" Medium
3 5/8 - 4 1/8" Large
4 1/8 - 4 5/8" X-Large
4 5/8 - 5 1/8" XX-Large
5- 1/8" and up XXXL
The Pivot Pad System has been...