Skydive Gear Superstore and Master Rigging
No products
Prices are tax excluded
CSC Store and Customer Service M-F 10am-4pm, Sat and Sun 9-5pm CDT. SDC Store - M-Th 11-4pm, Fri 10-5pm, Sat and Sun 8:30-5pm [ +1 815-786-4560] FREE SHIPPING anywhere in the USA on orders over $40!*
Usually ships in 1 week!
Warning: Last items in stock!
Availability date:
STUDENT (Stu) The STUDENT profile is designed for basic training of students and AFF. It is activated when the height above the landing location is lower than approx. 330m / 1 100ft and fall rate is higher than approx. 13m.s-1 / 29mph. The altitude lock opens at approx. 450m / 1 475ft. The device does not activate when below approx. 60m / 195ft. The activation zone is thus in the range of approx. 330m to 60m / 1 100ft to 195ft above the landing location. Warning: The speed of approx. 13m.s-1 / 29mph may be also reached with a fully functional parachute! If the student-skydiver does not go on with the jump and lands on board the aircraft, switch off the m2 multi device always in the STUDENT setting. If this is not possible, the aircraft must not descend faster than approx. 13m.s-1 / 29mph.
INTERMEDIATE (Int) The INTERMEDIATE profile is designed for basic training of advanced students and AFF. It is activated when the height above the landing location is lower than approx. 330m / 1 100ft and fall rate is higher than approx. 20m.s-1 / 45mph. The altitude lock opens at approx. 450m / 1 475ft. The device does not activate when below approx. 60m / 195ft. The activation zone is thus in the range of approx. 330m to 60m / 1 100ft to 195ft above the landing location. It is the recommended setting for students after completing the first ten jumps. It is solely upon the decision of the instructor to determine the setting and suitability of its use for a particular student. Warning: The speed of approx. 20m.s-1 / 45mph may be also reached with a fully functional parachute! If the student-skydiver does not go on with the jump and lands on board the aircraft, switch off the m2 multi device always in the INTERMEDIATE setting. If this is not possible, the aircraft must not descend faster than approx. 20m.s-1 / 45mph.
PROFESSIONAL (Pro) The PROFESSIONAL profile is the most commonly used setting of the device. Is designed for experienced skydivers. It is activated when the height above the landing location is lower than approx. 270m / 885ft and fall rate is higher than approx. 35m.s-1 / 78mph. The altitude lock opens at approx. 450m / 1 475ft. The device does not activate when below approx. 100m / 330ft. The activation zone is thus in the range of approx. 270m to 100m / 885ft to 330ft above the landing location. Warning: The speed of approx. 35m.s-1 / 78mph may be also reached with a fully functional parachute! If you are using a high-performance parachute, check the GRAVITY index! (Section 6.4).
CANOPY PILOTING (CPi) The CANOPY PILOTING profile is primarily intended for the Canopy Piloting sports discipline. The profile is used only for the most experienced pilots with extremely quick parachutes and vast experience. It is activated when the height above the landing location is lower than approx. 270m / 885ft and fall rate is higher than approx. 45m.s-1 / 101mph. The altitude lock opens at approx. 450m / 1 475ft. The device does not activate when below approx. 150m / 490ft. The activation zone is thus in the range of approx. 270m to 150m / 885ft to 490ft above the landing location. Warning: The speed of approx. 45m.s-1 / 101mph may be also reached with a fully functional parachute!
TANDEM (TAn) The TANDEM profile is designed for tandem kits. It is activated when the height above the landing location is lower than approx. 610m / 2 000ft and fall rate is higher than approx. 35m.s-1 / 78mph. The altitude lock opens at approx. 900m / 2 950ft. The device does not activate when below approx. 100m / 330ft. The activation zone is thus in the range of approx. 610m to 100m / 2 000ft to 330ft above the landing location.
Copyright © 2011 - 2016 Rock Sky Market. All rights reserved. | Designed by SunnyADZ
follow us